February 2019
User Instructions
MAN-02-04-60-0350-EN Rev. 3
31
Section 6: Control Unit
Control Unit
Depending on the selector switch position, the control switch performs different functions:
Table 3.
Control Switch Positions
Position
Function
Selector switch
in the OFF
position:
The control switch is used to scroll up or down the menu according to internal
symbolism. From the neutral position towards you reach the status and history
data areas. Towards the symbols you reach the parameter menu. Here, the
selection switch either confirms
or rejects the current input according to
associated symbolism.
Selector switch
in the REMOTE
position
:
The control switch gives you access to status, history data and parameter area.
Selector switch
in the LOCAL
position
:
With the control switch, the actuator can be operated by motor. You may also
operate the actuator in inching and self-hold mode. Switches are spring-loaded
to snap back automatically into their neutral position. (To confirm a control
command, the control switch must be pushed all the way into its mechanical
locking position.)
6.3.2
Configuration
In principle, all parameters are shown as numbers in the corresponding parameter
point. From the actuator menu, use the control switch to access different menu
points. The lower left corner of the display shows the "EDIT" option.
Figure 37
Configuration Display (1)
