Emerald Home 4, Паспорт и руководство по эксплуатации

Страница: 17 / 27

16
Attention! All works related to the preparation of the washing
solution as well as the entire flushing process of the device shall be
carried out using the personal protective equipment for the skin and
eyes!
FLUSHING mode.
To start this mode the EMERALD device must be in STANDBY mode (the device is connected
to the electrical network, but is turned off. The LED indicator is off).
Connection of the device in the FLUSHING mode is carried out according to the Fig. 11 . In
the FLUSHING mode, to connect the flushing device to the device, transparent PVC hoses from the
delivery kit are used (instead of the standard white tubes used in the OPERATION mode).
Fig 12. Connection of the EMERALD device in FLUSHING mode
All hydraulic and electrical connections must be securely locked . The device must be in
STANDBY mode and be connected to a power source. The flushing device should be located on a flat
and stable surface (on the countertop next to the sink or on the floor) and be connected to the device .
To turn on /off the flushing device and start /interrupt the FLUSHING mode , press
the on/off button on the body of the device ( Fig. 11 - " 8 " ). After the first press of the button , the
automatic procedure for PUMPING and RETENTION of the washing solution of citric acid be-
gins . During all stages of PUMPING and RETENTION of the washing solution, the LED in the de-
vice lights up in blue.
The automatic flushing procedure takes 30 minutes and consists of six similar sequential steps,
each of which includes:
a) 1 minute - pumping and circulation of the washing solution in the device (flushing device
included);
b) 4 minutes - exposure of the washing solution in the device (the flushing device is turned off);