background image

 

 

14 

7.

 

MAINTENANCE OF THE DEVICE. 

 
To achieve the highest quality of purified water in the EMERALD as well as to ensure the regulatory 
compliance of water quality the user shall regularly flush the device with the solution of citric acid. 
With timely and uncomplicated maintenance your device will produce the highest quality drinking 
water with excellent taste characteristics for many years. 
 
Important!  The  EMERALD  does  not  require  the  consumables  materials  and  high-wear  parts.  The 
electrochemical module and the auxiliary filtering elements (catalytic filter and electrokinetic filter) 
do not require the periodic replacement while observing the operating rules described above. 
 
Maintenance  of  the  EMERALD  including  the  regular  flushing  of  the  entire  device  (including  the 
electrochemical module and filter elements) with the solution of citric acid to remove the accumulated 
impurities and deposits. The regularity of maintenance of the EMERALD depends on the quality of 
the primary water, the usage rate and it is also based on user’s experience. At the average when using 
the drinking water from the municipal water supply devices the maintenance of the device shall be 
carried out at least once every 4 months or after 1,200 liters of the purified water (whichever comes 
earlier). 
 
The EMERALD automatically monitors the volume of purified water and it notifies you about the 
need for flushing: 

u

 

After 8 hours

 of working in the OPERATION mode the LED will light in orange (≈480 liters 

of the purified water) indicating that the device is DESIRABLE to flush with the citric acid 
solution. 

u

 

After 10 hours

 of working in the OPERATION mode (≈ 600 liters of the purified water) the 

LED will light in red indicating that the Unit MUST be flushed out with the citric acid solution. 
 

Important!

 The flushing frequency is calculated for the tap water with average salinity of 

200 ppm. For regions with the excessive water hardness (mineralization of more than 350 ppm) 
it is necessary to use the water softener filter (purchased separately) or to perform more frequent 
flushing  of  the  device  with  the  citric  acid.  The  regularity  of  the  flushing  in  this  case  is 
determined in situ depending on the hardness of the supplied tap water, the operating mode of 
the device and the organoleptic qualities of the purified water.  

 
* If during the operation of the device after a series of flushes it seems to you that the taste of 

purified water does not suit you it is possible to purchase and replace the filter elements of the device. 
The order can be placed with your nearest dealer or at the official website of the manufacturer. 
 

 

Содержание Home 4




























Отзывы: