Emerald Home 4, Паспорт и руководство по эксплуатации

Страница: 9 / 27

8
5. CONNECTION OF THE DEVICE
ATTENTION! This section describes the main method of connecting
the EMERALD device above the sink, recommended by the manufacturer. If you use an alternative
method of connecting the EMERALD device, you must make sure that the method you choose does
not contradict other conditions of this Passport and the instruction manual. In the event of a violation
of the device and operating conditions of the EMERALD device, claims for warranty may be rejected.
EMERALD device location above the sink.
The EMERALD device can be located without fas-
tening on the countertop, or it can be fixed to the wall with
screws, for which there are special suspensions on the rear
wall of the devices’ casing ( see Fig. 5). To connect the EM-
ERALD device above the sink, you must use the connect-
ing tubes (white tube ¼ made of food-grade plastic) and the
parts included in the kit
to connect the device in accordance
with the diagram in Fig. 7 .
ATTENTION! Before starting the device connec-
tion procedure, be sure to familiarize yourself with the basic
principles of connecting a white tube to fittings described in
the General Guidelines for Handling Quick Couplings of the
John Guest® Type Section .
Connecting an EMERALD device requires certain
skills in working with plumbing equipment. We recom-
mend using the services of authorized specialists of the
company EMERALD ECOTECHNOLOGIES LLC , a rep-
resentative of the dealer network or the services of a quali-
fied plumber-plumber of the housing and communal ser-
vices organization at your place of residence. Do not install the device in a place where its maintenance
will be difficult.
Before connecting, turn off the cold water tap and then open the cold water tap on the kitchen
faucet to relieve pressure in the pipe. Avoid direct sunlight on the surface of the device enclosure.
Fig. 5 EMERALD device option for wall
mounting near the sink .