DPSI LCD Operating Instructions
Version 1.0
Page 25 of 32
9.2. Operating Mode
An option is programmable or not depending on the DPSI system
used. Confirming “operating mode” using the “SET”-button brings you
into the submenu for setup. At the beginning, the active line is always
“RETURN”. If the “SET”-button is pushed again, the menu is exited.
The asterisk “*” after “FAILSAFE” indicates an active option. Using
selects the corresponding line (here “Master/Slave”) and “SET”
confirms the programming. Now, the asterisk “*” appears at option
“Master/Slave”. By selecting “RETURN” and confirming using the
“SET”-button exits the menu.
