DPSI LCD Operating Instructions
Version 1.0
Page 26 of 32
9.3. Switching Positions Failsafe
The option “Switching Position” defines which signals at the failsafe
input of the DPSI TWIN Mini switches from one receiver to the other. If
the option “FAILSAFE” is programmed, “PASS” and “FAIL” are
displayed. In case Master/Slave was activated, “MAST.” and “Slave”
are displayed instead.
When activating this option, both current saved values are displayed
(here +120% and -120%). If the value of “PASS” is to be changed, the
line is to be selected and confirmed using “SET”. Asterisk “*” and the
current servo position at the failsafe channel in % is displayed now. As
soon as the desired value is reached, it is confirmed by pressing
“SET”. The asterisk disappears. The same is conducted for “FAIL” and
the menu is exited. You find additional information in the operating
instructions for the DPSI TWIN Mini.
