DPSI LCD Operating Instructions
Version 1.0
Page 22 of 32
8. Resetting Stored Values
The values for operating time (flight-time in minutes) and withdrawn
capacity (in mAh) can be reset. This is usually done after charging the
batteries. Because the batteries are normally fully charged after
charging, the DPSI system counts withdrawn capacity starting from 0
after reset.
Hint:
The capacity can only be reset if the DPSI LCD is connected to a DPSI system
which supports measurement of capacity (e.g. dual power supply). The DPSI
TWIN Mini without a dual power supply unit (just as receiver switch) does not
support this function (only reset of the flight-time)!
In order to reset saved values during operation push the
button
and the “SET “-button simultaneously.
When activating the reset menu deleting
data must be confirmed. The reset menu
exits without changing anything if no
buttons were pushed after 10 seconds.
Deletion of values is confirmed with
“OKAY!” and the reset menu is
automatically exited.
