EMC SVR-I1U-1304, Руководство по установке и обслуживанию

Страница: 17 / 29

Replacing the faulted disk drive assembly
Procedure
1. Attach an ESD wristband to your wrist and the server chassis.
2. Remove the faulted disk drive assembly (
Figure 14 on page 17 ):
a. Press the green button on the left side of the disk drive assembly to unlock the
module’s lever.
b. Pull the lever open and slide the disk drive assembly from the server.
Figure 14 Removing the faulted disk drive assembly
A
B
CL4881
3. Unpack the replacement disk drive assembly and save the packing material for
returning the faulted disk drive assembly.
4. Install the replacement disk drive assembly ( Figure 15 on page 17 ):
a. With the lever on the replacement disk drive assembly in the fully open position
(green button to the right), slide the module into the server.
b. When the lever begins to close by itself, push on the lever to lock it into place.
Figure 15 Installing the replacement disk drive assembly
B
A
CL4882
5. Remove and store the ESD wristband.
Replacing the faulted disk drive assembly
17