EMC FC4400, Справочник по аппаратуре

Страница: 48 / 134

2
2-6
EMC Disk-Array Processor Enclosure (DPE) Deskside Model FC4400/4500 Hardware Reference
Installing a Deskside DPE
reserved for the DPE, valid EA ranges for the DAE are 1 through
11 (decimal). We recommend that you assign address number 1 to
the DAE closest to the DPE.
Set the EA with the EA switch, which has one push button for
incrementing the address and another for decrementing it. To set
the EA, you must open the DAE’s front door. The switches have
lights that display the EA address. These lights are visible when
the door is closed.
Set the DAE enclosure address (EA) to the desired value using the
tip of a pen or paper clip, as shown below.
Figure 2-4
Setting the Enclosure Address (EA)
6. Close the DAE front door as shown on the next page.
The door must be closed for EMI compliance. Open it only to service the
DPE or DAE.
Enclosure
address lights
Increment button
Push to increase address.
Decrement button
Push to decrease address.
Address
switch
NOTE: The address
switch has 16 posi-
tions, 12 are marke
0 through 11 and th
remaining 4 are
marked with a dash
(-). A dash position
is equivalent to the
position.
00
1
2 3
4 5
12
3
6 7
8 9
10 11
2