EMBRON Hatteland E Series, Руководство пользователя

Страница: 47 / 136

47
IND100129-234
All specifications are subject to change without prior notice!
Specifications - HD 21T30 MMC-xxx-xxxxxx
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hattelandtechnology.com for the latest electronic version.
2/2
• W:536.00 [21.10"] x H:358.50 [14.11"] x D:78.50 [3.09"] mm [inch]
• Weight: Approx. 7kg / 15.43lbs
• 21.5 inch TFT Liquid Crystal Display module, VA (Vertical Alignment)
• a-si TFT Active Matrix
• Widescreen, Aspect Ratio 16:9
• LED Backlight Technology
On front bezel IP66:
• Power On/Off, Brightness Control (-/+), Power LED, ECDIS LED
• Buzzer, Light Sensor
A P P R O V A L S & C E R T I F I C A T E S
Physical Dimensions: TFT Technology:
This product have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002) IACS E10 EU RO MR - Mutual Recognition ClassNK - Nippon Kaiji Kyokai
CCS - China Classification Society
User Controls:
• Native Resolution : 1920 x 1080 (FHD)
• Pixel Pitch (RGB) : 0.24795 (H) x 0.24795 (V) mm
• Response Time : 25ms (tr+tf) (typ)
• Contrast Ratio : 3000:1 (typ)
• Light Intensity : 250 cd/m 2 (typ)
• Viewable Angle : 89 deg. (up/down/left/right) (typical)
• Active Display Area : 476.064 (H) x 267.786 (V) mm
• Max Colors : 16.77M colors (RGB 8-bit)
TFT Characteristics:
• Supported OS : See table below
• CPU/Processor : 1 x Intel Atom® x7-E3950 Processor, 2M Cache,
1.60GHz / 2.00GHz
• Installed Storage : 32GB eMMC (Default). See table below
• Installed Memory : 2GB DDR3L single channel. See table below
• System Chipset : Intel® SOC
• Graphics Chipset : Intel® HD Graphics 505 (CPU dependent)
Supports OpenGL 4.6 (Windows/Linux) and
OpenGL ES 3.2 (Linux)
• Ethernet LAN #1 : Realtek Gigabit LAN 10/100/1000Mbps
• Ethernet LAN #2 : Intel Gigabit LAN 10/100/1000Mbps
• BIOS : AMI BIOS, supports ACPI
• Buzzer : Yes (according to EN60945)
• Speaker : None
• WatchDog Timer : Yes (256 segments, 0, 1, 2...255 sec/min)
• Other features : RTC (0.5s/day), Battery Alarm, WakeOnLan,
Fast Boot, AT mode, USB Boot, TPM2.0
• DP++ Out Max Res. : 640 x 480 to 4096 x 2304 @ 60Hz
Computer Specifications:
• Operating Temperature : -15°C to +55°C
• Storage Temperature : -20°C to +60°C
• Humidity : Humidity up to 95% (Operating / Storage)
• IP-Rating Protection : IP66 front - IP20 rear (EN60529).
• Compass Safe Distance : Standard: 70cm - Steering: 60cm
Lifetime Considerations:
Even though the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Environmental Considerations:
• Projected Capacitive Touch Screen (Multitouch,USB,Pen/Glove support)
• Optical Bonding Technology
• Variations of Storage, RAM Memory and Operating Systems.
• 1 x HT 00235 OPT-A1: 2W Amplified Audio out via DB9F
- Model with 1 x Diskbay with support for 2 x 2.5" and max 2 Modules
- Model with 3 x Modules, no Diskbay
Modules available (depending on base model above):
Review full configuration matrix in User Manual INB101505-1
1,2 or 3 x PCA200828-1: 4xCOM RS-422/485 isolated NMEA 4 channel
or 1,2 or 3 x PCA100309-1: Dual Isolated RS-232, connector 2xDB9
or 1,2 or 3 x PCA100294-1: Quad Non-Isolated RS-232, connector 4xDB9
or 1 x ZIA0001310-B: CAN isolated 2 channel or 2 x 4 channel
or 1 x ZIA0001310-SLCAN (1 x CAN isolated, 2 channel, socketCAN) module
or 1 x PCA100297-1: Isolated Digital IO module,4 x OUT/4 x IN
or 1 or 2 x PCA100298-1: LAN 10/100Mbps, 2 ports RJ45
Factory Options:
Power Supply Options:
• Multi-Power option : 100-240V AC - 50/60Hz + 24VDC (MMC-Mxx)
• Single AC Power Option : 100-240V AC - 50/60Hz (MMC-Axx)
Note: You may connect either AC power or DC power or both. In case both sources
are connected, power will be sourced from the AC input. If AC input is lost, there will
be a uninterrupted switch-over to DC input.
Power Consumption:
*(see note)
• Operating : 44W (typ) - 54W (max)
Power Specifications:
• HD CMB SE1-B1 : 1 x Console Mount Kit. EN60945 Tested**
• HD TMB SE1-B1 : 1 x Table Mount Bracket. EN60945 Tested
• HD VED SX1-A1 : 1 x VESA Adapter, not EN60945 Tested
• JH C01MF A-A : 1 x USB Cable 1m, TypeA-Chassis mount receptacle
• HT 00262 OPT-A1 : 4 x RS-422/RS-485 isolated, USB ext. module
• HT 00263 OPT-A1 : 4 x RS-232 COM non-isolated, USB ext. module
• HT 00264 OPT-A1 : 1 x CAN isolated, 2 channel, USB ext. module
• HT 00273 OPT-A1 : 4 x Digital IN/OUT isolated, USB ext. module
• HT 00274 OPT-A1 : 2 x LAN 10/100Mbps, RJ45, USB ext. module
• HT 00300 MSOS : OS options:
https://www.hattelandtechnology.com/options-for-downgrade-upgrade-change-
or-add-of-microsoft-windows
• HD 000TR SX2-A2 : 1 x Removable Tray 2.5" Empty
• HD xxxyy SX1-z1 : 1 x Removable Tray 2.5" w/Storage Device*
*Where xxx=Size of device. yy=GB,TB. z=S (SSD) - Choose Device from table.
**Included in delivery
Accessories:
Connector Rear
• DisplayPort (DP++) Out : 2 x 20p DisplayPort (female)
• USB2.0
: 4 x USB Type A
• Ethernet GBLan : 2 x RJ-45
• COM RS-232 & 422/485 : 1 x DB9M non-isolated (Change RS mode in BIOS)
• AC Power IN
: 1 x Std IEC inlet
• If DC Power IN : 1 x 2-pin Terminal Block 5.08
Input/Output Connectors:
Available Computer Configurations:
Type Description Size/Specification
Memory/RAM DDR3L, 1600MHz,
SO-DIMM
- 2GB Single Channel
- 4GB (2x2GB) - Dual Channel
- 8GB (2x4GB) - Dual Channel
Additional Internal
Storage
m.2 - 240GB->
Software Support Application Programming
Interface (API) - as defined
in associated documents
- SCOM
OS Options, 32/64
bit where
applicable
Windows® 10 IoT Enterprise 2019 LTSC (64bit)
- Product Distribution End Date January 2029
or
Linux:
Kernel 4.10 or later
*Power Consumption: Numbers are specified as the unit is delivered from factory.
All additional installed equipment like USB, PCIe and similar loads have to be added
to power consumption. Note that total extra load have to be multiplied by 1.5 to
compensate for efficiency in internal power converters. Typical power consumption
varies a lot with computer load. We measure with 25% of max computer load.