
Physical Connections
35
IND100133-74
COM4 Serial Port INPUT / OUTPUT:
Supports RS-232/RS-422 Full Duplex and RS-485 Half Duplex using 1 x D-SUB 9P connector (male). Fasten the
cable to the connector using the provided screws on the cable housing itself. Enter BIOS to change RS protocol mode
and review Pinout Assignments details for pinning/wiring.
Network (1, 2) INPUT / OUTPUT:
Supports 10/100/1000Mbps Ethernet (LAN). Suitable for twisted pair cables CAT.5E. Make sure the network cable
connector ”clicks” into the RJ-45 connector.
USB2.0 (1, 2, 3, 4) INPUT / OUTPUT:
Supports USB1.1 (<10m, 12Mbps) and USB2.0 (<5m, 480Mbps) compliant peripherals. Drivers for most USB devices
are usually included in operating system or on separate installation DVD’s delivered with Third Party products.
Note: USB2.0 port 1 and 2 shares resources so performance will be reduced if both are used at full load
simultaneously. USB2.0 port 3 and 4 will always operate at full speed and should be used for any devices that require
high bandwidth, example external USB drive.
AUDIO AMP (Factory option):
If ordered as factory option, the unit can utilize 1 x D-SUB 9P connector (female)
for 2W Amplified Audio Mono/Stereo
Out. Review Pinout Assignments details for pinning/wiring.
HDMI IN (Reserved):
Factory option not available for standard models.
VGA IN (Reserved):
Factory option not available for standard models.
2 x 2.5” Removable Storage SATA SSD Trays (Factory Option):
If ordered as factory option, the unit can utilize user accessible 2 x Storage Devices (SSD) of 2.5” size. The storage
devices can be easily be upgraded or replaced by loosening
the thumbscrew on each side and pulling the tray out.
Before inserting or removing trays with SSD devices installed,
the Panel Computer unit must be shut down / powered
down before proceeding.
Single Removable Tray and Pre-mounted Storage
Device are available from Hatteland Technology as accessory.
Typenumber
: HD xxxyy SX1-z1
Where x =
:
Size
Where y =
:
MB, GB, TB
Where z =
:
Physical Format / Device Type
(Physical Format examples: 2.5”, 3.5”)
(Device Type examples: SSD, HDD)
Please review datasheet for your model to determine Size,
Format and Device Type compatible with your model.
or Empty Removable Tray 2.5” tray + 4 x M3x4mm screws.
Typenumber
: HD 000TR SX2-A2
Содержание Hatteland E Series
