EMBRON Hatteland E Series, Руководство пользователя

Страница: 37 / 136

Physical Connections
37
IND100133-74
Module Expansion Matrix
Table below indicates how many duplicates of the same module can be installed at the same time. Due to limited
number of internal connectors, available space and technical limitations, some combinations (with duplicates) are
naturally not possible to achieve.
Factory Standards
The following illustration indicate mounting locations of the varirty of modules available and how they are numbered to
keep a persistent configuration at our factory. This is seen from user’s Point-of-View at rear of the unit.
Priority List amongst module installed in Expansion Area 1,2 and 3
1: COMx2 [A]
2: COMx4 [B]
3: NMEA COM [C]
4: DIO [D]
5: LAN [E]
6: CAN / SLCAN [F]
NOTE: Table on next page is only applicable to 21.5, 23.8 and 27.0 inch. These have support for max 3 modules.
15.6 inch has only option for a single module (rules above and on previous page applies).
Priority numbering starts from Right to Left as illustrated for models with 2 x module areas:
2 1
Priority numbering starts from Right to Left as illustrated for models with 3 x module areas:
2 1 3