ELECTRIC MOTION
35
9.5 Stop and put the stand
To turn off the vehicle, follow the procedure below:
-
Set the main switch to the OFF position
-
Turn the key in the switch to the OFF position
-
Unfold the stand and press the motorcycle on it. Make sure
that the motorcycle is stable on a hard and stable ground
to avoid falling. Beware of sloping floors, the motorcycle is
coasting when it is stopped.
Do not leave your motorcycle unattended after use.
After riding, some parts of the motorcycle may be hot, so be sure not
to touch them before they are fully cooled to avoid any risk of burns.
9.6 Cleaning the motorcycle
The motorcycle must be cleaned with water. It is possible to use a
soap to clean it.
For the cleaning of the motorcycle it is necessary to:
-
Wash the motorcycle without insisting on the components
vulnerable to moisture (electrical components, external
controls, external bearings),
-
Rinse the motorcycle correctly with clean water,
-
Dry the motorcycle, insisting on the contacts.
Do not clean the handlebar directly with a high pressure
cleaner.
Содержание ETREK 2107
Страница 1: ...2017 User manual...
Страница 14: ...ELECTRIC MOTION 14 5 2 Rear view 5 3 Right view...
Страница 18: ...ELECTRIC MOTION 18 7 4 Turn signal Front Rear...