EM ETREK 2107, Руководство пользователя

Страница: 34 / 38

ELECTRIC MOTION 34
9.4 Braking
The front brake lever, located on the right side of the handlebar,
brakes only the front wheel. The rear brake lever on the left side of
the handlebars allows the rear brake to be braked mostly and the
front brake slightly. The distribution of the braking proportions is
managed by the CBS system.
The brake levers operate the brakes when the lever is tightened.
It is important to be fully aware of the braking capacities for safe
driving on public roads.
To brake properly, under normal traffic conditions, stop the throttle
and brake simultaneously with the front brake and the rear brake for
strong braking or only the left lever (front and rear brakes) for soft
braking.
For low-intensity braking, the use of the regenerative brake is
recommended, which allows the battery to be recharged at the same
time.
When braking, the throttle grip must be in the closed position
(acceleration stopped).
Braking too strongly causes the wheels to lock and makes the
motorcycle dangerously uncontrollable. It is necessary to adapt its
braking to the situation and the pavement condition.
Check the condition of the brake system before each use. A wet
or dirty brake system greatly reduces braking performance. Clean and
degrease the system if grease or dirt is present.
If there is any doubt about the condition of the brake system, contact
Electric Motion customer service.