EM ETREK 2107, Руководство пользователя

Страница: 26 / 38

ELECTRIC MOTION 26
- The inclination of the handlebar is at the discretion of the
user
- Keep the wires through the provided rilsans as the picture
attached.
Installation of the brake system after reception
The brake system is fixed on a transport plate to prevent damage
during transport. Before using the vehicle, it is important to make
sure that the brake system is correctly positioned. They must be
assembled in accordance with the following procedure:
- Reassemble the master brake cylinders with the supplied
screws, with a tightening torque of 8 Nm.
The brakes are mounted on a plate to prevent them from being
tilted during transport. The tilting of the master brake cylinder for a
period of time may cause a decrease in braking.