EM ETREK 2107, Руководство пользователя

Страница: 25 / 38

ELECTRIC MOTION 25
8. Commissioning
8.1 Preparation for motorcycle receipt
When the vehicle is received, the handlebar is disassembled, the toe-
pads folded and the brake system assembled on the transport plate.
It is therefore necessary to mount all its components in order to use
the motorcycle.
Mounting of the handlebar after receipt
The handlebars are supplied in the box accompanying the motorcycle
and must be assembled in accordance with the following procedure:
Remove the plastic protection on the levers after assembly is
complete.
- Dismantle the brake master cylinders of the transport plate
/ disassemble the transport plate of the bridges.
Do not over-handle the brake master cylinders, do not turn
them upside down.
- Reassemble the handlebar as shown in the following
picture with the 4 screws provided, tightening at 20 Nm,
take care to center the handlebars and screw the upper
bridges evenly.