EM ETREK 2107, Руководство пользователя

Страница: 28 / 38

ELECTRIC MOTION 28
8.2 Instructions for initial commissioning
Before using the motorcycle, the user must read the entire user
manual.
The electric motorcycle brings a new driving experience, a time of
adaptation is necessary to become familiar with the new sensations
that it brings before being fully confident when traveling with other
traffic users.
On a suitable ground, performed some exercises to gain confidence
on the vehicle.
To maintain control of your vehicle, always hold the handlebar with
both hands and keep your feet on the toe-pads.
Do not use the vehicle if you are not in full possession of your
means.
Adapt a cautious behaviour for you and other road users.
Do not exceed the permissible payload by the vehicle.
Do not leave your vehicle unattended (risk of theft).
An electric motorcycle makes no noise when it is running, do
not make yourself surprised.
8.3 Battery Charging Procedure
The procedure of charging the vehicle is meticulous, it is important to
be familiar with this procedure before the first charge of the battery.
The battery must be charged over a temperature range of 10°C to
40°C.
Due to the strong current, electrical arcs may occur when
connecting the connector to the battery
Use only the charger supplied with the motorcycle to charge the
battery. This charger is designed to operate only under lithium
polymer battery.
Always place the charger on a flat, solid surface in a dry, ventilated
area.
Never cover the charger while charging the battery, otherwise it may
interfere with its ventilation and cause the charger to overheat.