EM ETREK 2107, Руководство пользователя

Страница: 11 / 38

ELECTRIC MOTION 11
3.7 Power supply
The
Electric Motion ETrek is powered with a lithium-polymer battery
with a nominal voltage of 51.8V and a capacity of 52Ah.
It is possible to remove and reassemble the battery pack during
certain maintenance operations. To carry out these operations, it is
important to refer to the relevant chapter.
3.8 External Materials, Parts and Supplies
To maintain your vehicle, it is important to use parts and consumables
(lubricants and maintenance products) in accordance with the
specifications given in the user manual.
3.9 Operation under extreme conditions
The ETrek is not sensitive to water and rain. However, care must be
taken to ensure that the water level does not exceed the foot-rest.
In the event of difficulties encountered on a passage of water
point (vehicle stopped), it is necessary to turn off the motorcycle to
avoid a short circuit or a breakdown of the motorcycle.
The ETrek can be used over a wide temperature range: -15°C to 55°C.
The battery life of the Etrek model depends on the operating
temperature:
Operating
temperature
(°C)
-15 -10 0 25 40 55
Decrease in
autonomy
-30% -25% -15% -0% -3% -4%
Use of the vehicle in extreme conditions (sand, mud) leads to
premature wear of the motorcycle's consumables (chain, brake pads,
various bearings). It is then necessary to carry out the checks and the
maintenance operations more often than prescribed in the manual of
use.
3.10 Reception of the motorcycle
When receiving the ETrek model, it is necessary to perform some
operations to make the motorcycle usable (assembly of protected
parts during transport). Please refer to the corresponding chapter (8).