35
GB
3.4 How to use
3.4.1 Start cooking
Touch the ON/OFF control. After
power on, the buzzer beeps
once, the timer control shows
“00”
,
and the heating zone
selection control shows “ ” or
“ ” or “ ”, indicating that the
induction hob
has entered standby mode.
Place a suitable pan on the coo-
king zone that you wish to use.
• Make sure the bottom of the
pan and the surface of the
cooking zone are clean and
dry.
Touch the heating zone selec-
tion control – an indicator
will flash for the zone you
selected.
Adjust the heat setting by
touching the slider control.
• If you don’t choose a heat
setting within 1 minute, the
induction hob will automati-
cally switch off. If this happens
you will need to start again at
step two.
• You can adjust the heat setting
at any time during cooking.
Touch to select the heating zone that
you wish to switch off.
Turn the cooking zone
off by touching the slider
to the left. Make sure the
display shows “0”.
Turn the whole hob off by touching
the ON/OFF control.
Beware of hot surfaces
The letter H shows which cooking
zone is hot to touch. It will disappear
when the surface has cooled
down to a safe temperature.
This can also be used as an
energy-saving function – if you
want to heat further pans you
simply use the heating zone
that is still hot.
3.4.2 Finish cooking
If the display flashes
alternately with the heat
setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centred on the cooking
zone.
No heating takes place unless there is a suitable pan on the
cooking zone.
The display will automatically turn off after 1 minute if no
suitable pan is placed on the hob.