35
GB
NOTE: It might be necessary to push firmly.
4. Adjust the length of the telescopic tube. Press down the release latch on the tube
(Fig. 4/1) to do this. Then pull the handle of the telescopic tube to extend (Fig. 4/1)
it to your desired length. Let go of the release catch while pulling until it locks in
place. You will hear a distinct click. Your vacuum cleaner is now ready for use.
2.3 Using other nozzles (accessories)
Besides the floor nozzle you just attached, you can fit other nozzles to your
vacuum cleaner for different purposes.
• The combi brush and the crevice nozzle are included in the package as
accessories. You can store them in the accessory compartment when
not in use (Fig. 5).
- Combi brush (Fig. 6/1)
Use this to remove dust from objects with delicate
surfaces (e.g. cupboards and tables).
- Crevice nozzle (Fig. 6/2)
Use this to to suck dust out of hard-to-reach places.
WARNING:
Only attach nozzles when the vacuum cleaner is not connected to the mains
supply. The appliance could be switched on by accident.
This is how you attach the nozzles:
1. Switch off the vacuum cleaner and pull the plug from the mains socket.
2. Pull the attached nozzle off the telescopic tube.
ATTENTION:
Using the vacuum cleaner without a nozzle attached
increases the danger of accidentally sucking in objects.
4. If possible, store nozzles that are not in use on the
accessory bracket.
