VP-12, VP-12P IP phones. Operation manual
49
Timers
•
Interdigit Long Timer
(«L» character in a dialplan record)
– entry timeout for the next digit, if there are no
templates that correspond to the dialled combination.
•
Interdigit Short Timer
(«S» character in a dialplan record)
– entry timeout for the next digit, if the dialled
combination fully matches at least one template and if there is at least one template that requires an
extension dialling for the full match.
The timers values might be assigned either for the whole dialplan of for a certain rule. The timers valiues
specified before round brackets is applyed for the whole dialplan.
Example: S4 (8XXX.) or S4, L8 (XXX)
If the value of timers are specified in a rule, they are applyed to this rule. The value mignht be located at any
position in a template.
Example:
(S4 8XXX. | XXX) or ([1-5] XX S0) – an entry requests instantaneous call transmission when 3-digit
number dialing; a number should begin with 1,2,
…
,5.
Prefix part of the rule
Prefix part might consist of the following elements:
Prefix part
elements
Description
X or
х
Any digit from 0 to 9, equivalent to [0-9] range
0 - 9
Digits from 0 to 9
*
Symbol *
#
Symbol #
[ ]
Specify a range (using dash), enumeration (without gaps, comas and other symbols between digits) or
combination of range and enumeration.
Example of a range:
([1-5]) – any digit from 1 to 5.
Example of enumeration:
([1239]) – any digit out of 1, 2, 3 or 9.
Example of a range and enumeration combination
: ([1-39]) – the same as in the previous example but in
another form. The entry corresponds to any digit from 1 to 3 and 9.
The use of # in a dialplan can cause blocking of dial completion with the help of # key!
