VP-12, VP-12P IP phones. Operation manual
61
•
Console –
messages are output to the device console (requires connection via COM port adapter).
•
Telnet –
messages are output to the telnet session; create telnet protocol connection first.
•
Error –
select this checkbox, if you want to collect «Error» type messages.
•
Warning –
select this checkbox, if you want to collect «Warning» type messages.
•
Debug –
select this checkbox, if you want to collect debug messages.
•
Info –
select this checkbox, if you want to collect information messages.
Syslog Settings
If there is at least a single log (VoIP manager, system manager or configuration manager) is configured for
Syslog output, you should enable Syslog agent that will intercept debug messages from the respective
manager and send them to remote server or save them to a local file in Syslog format.
•
Enable –
when selected, user Syslog agent is launched.
•
Mode –
Syslog agent operation mode:
•
Server
–
log information will be sent to the remote Syslog server (this is the 'remote log' mode);
•
Local file –
log information will be saved to the local file.
•
Server and file –
log information will be sent to the remote Syslog server and saved to the local
file.
•
Syslog server address
–
Syslog server IP address or domain name (required for
'Server' mode).
•
Syslog server port
–
port for Syslog server incoming messages (default value is 514;
required for 'Server' mode).
•
File name –
name of the file to store log in Syslog format (required for 'File' mode);
•
File size, KB –
maximum log file size (required for 'File' mode).
2.2.3.4 «Password» submenu
In the 'Passwords' submenu you may define passwords for administrator, non-privileged user, and viewer
access.
Defined passwords allow for the device access via WEB interface and also via Telnet protocol.
When signing into WEB interface, administrator (default password:
password
) has the full access to the
device: read/write any settings, full device status monitoring.
To apply a new configuration and store settings into the non-volatile memory, click
'Apply'
button. To
discard changes, click
'Cancel'
button.
Administator login – admin
