VP-12, VP-12P IP phones. Operation manual
22
IPsec settings
In this section you may configure IPSec encryption (IP Security).
IPSec is a set of protocols used for protection of data transmitted via Internet Protocol that enables
authentication, integrity check and/or encryption of IP packets. IPSec also includes secure Internet Key
Exchange protocols.
In the current firmware version you may only access the device management interfaces (Web, Telnet) using
IPsec.
•
Enable
– enable IPSec protocol utilization for data encryption;
•
Interface
– this setting takes effect only when PPPoE is selected for the Internet, and defines the
interface that will be accessed with IPSec: Ethernet (secondary access interface) or PPP (primary
access interface). When DHCP or Static protocol is selected, there is only a single active interface
(Ethernet) for the service that may be accessed with IPSec only;
