VP-12, VP-12P IP phones. Operation manual
14
2 Managing VP-12(P) via web interface
2.1 Getting started
•
Pre-starting procedures
•
Web interface description
•
Web interface operation modes
•
Key elements of web interface
•
Applying configuration
•
Discarding changes
2.1.1 Pre-starting procedures
To start the operation, you should connect the device to PC via LAN interface. Use a web browser:
1. Open web browser, i.e Firefox, Opera, Chrome.
2. Enter the device IP address in the browser address bar.
When the device is successfully detected, username and password request page will be shown in the browser
window:
It is recommended to reset the device to factory settings when switching it on for the first time. Use
display menu and buttons to reset the device – implement the following:
Menu -> 3. Settings -> 2. System -> 5. Reset settings -> Yes
The device will automatically reload.
By default, IP phone receives an IP address and other network parameters via DHCP.
To get an obtained IP address, implement
Menu -> 1. Status
using display menu.
