25
Parameter setting
GPS Receiver Vari KNX GPS
• Status: 22.08.2017 • Errors excepted. Subject to technical changes.
6.6.1. Calendar clock Period 1-4
Set whether the switching date and the switching time are set per object and in which
cases the switching dates and times received are to be retained. Please note that the
setting "After power restoration and programming" should not be used for the initial
start-up, as the factory settings are always used until the first call (setting via objects
is ignored).
Define the period
Sequence 1 / 2
Define the switching times.
Use objects for switching times
No • Yes
Maintain the
switching data and times received via com-
munication objects
• never
• after power restoration
• after power restoration and
programming
.
From:
Month
January … December
Day
1 … 29 / 1 … 30 / 1 … 31 (according to
month)
Up to and including:
Month
January … December
Day
1 … 29 / 1 … 30 / 1 … 31 (according to
month)
Switch on time (hours)
0 … 23
Switch on time (minutes)
0 … 59
Switch-off time (hours)
0 … 23
Switch-off time (minutes)
0 … 59
Switching output sends
• never
• on change
• on change to active
• on change to inactive
• on change and periodically
• on change to active and periodically
• on change to inactive and periodically
Send cycle
(if sent periodically)
5 s ... 2 h; 10 s
