7
Installation and start-up
GPS Receiver Vari KNX GPS
• Status: 22.08.2017 • Errors excepted. Subject to technical changes.
2.4.2. Fitting the lower part of the housing with mounting
Now, first of all, assemble the lower part of the housing with the integrated mounting
for wall or pole installation.
Wall installation
Use fixing materials (dowels, screws) that are suitable for the base.
Fig. 5
The device is installed with two screws. Break
off the two longitudinal holes in the housing.
Longitudinal holes
Fig. 6 a+b
a) If the power lead is to be hidden when in-
stalled, it must emerge from the wall in
the vicinity of the rear of the housing
(marked area).
b) If the power lead is to be surface-mount-
ed, the cable guide is broken off. The lead
is then fed into the device from the bot-
tom of the housing.
Cable guide
