10
Maintenance
GPS Receiver Vari KNX GPS
• Status: 22.08.2017 • Errors excepted. Subject to technical changes.
The programming button can be reached through the opening on the underside of the
housing; it is recessed by approx. 8 mm. Use a thin object to reach the button, e.g. a
1.5 mm² wire.
4.
Maintenance
WARNING!
Risk of injury due to automatically moved components!
The automatic control may cause parts of the system to start up and
pose a danger to humans.
•
Always disconnect the system from the mains power before
maintenance or cleaning.
The device should be regularly checked twice a year for soiling and cleaned if required.
If there is major soiling, the function of the receiver may be limited.
ATTENTION
The device may be damaged if water penetrates the housing.
•
Do not clean with high pressure cleaners or steam jets.
Fig. 13 a+b
1
Programming LED (under the semi-
transparent cover)
2
Programming button for teaching
the device
1
2
2
Housing from below
