elsner elektronik KNX RF-MSG-DST, Установка и настройка

Страница: 17 / 26

15 Parameter setting
Radio actuator KNX RF MSG-DST Version: 27.06.2018 • Technical changes and errors excepted.
that the bus is not blocked by too many data packets during a longer movement. The
position can also be transmitted cyclically.
Scenes:
Here the scene menu is activated for this output channel.
See Scenes , page 21.
4.3. Control
Set the behavior of the drive here.
Set the behavior after reset and download as well as the direction of reference travel.
Blocking objects:
The output channel can be blocked in case of rain, wind or other events. The manual
operation is then not possible. Blocking and monitoring are configured here first. For
setting the individual blocks, separate menu items "Blocking X" will appear (see
chapter
Block – blocking objects , page 17, Block – wind blocking , page 18 and Block –
rain blocking , page 19).
The priorities of the blocking objects correspond to the sequence listed (Block 1 has the
highest priority, Block 5 the lowest).
Use status object no • yes
Use drive position feedback no • yes
Position transmit delay after change in 0.1 s
(only for feedback)
0...50; 10
Transmit drive position cyclically
(only for feedback)
no • 5 s • 10 s • ... • 2 h
Use scenes no • yes
Behavior after reset and download • no action
• Up command
• Down command
Direction of reference travel • in safe position
• in closed position
(move out shading)
• in open position (window)
• shortest route
Use Block 1 (high priority) • no
• yes, with blocking object
• yes, as wind blocking
• yes, as rain blocking
Use block 2 • no
• yes, with blocking object
• yes, as wind blocking
• yes, as rain blocking