elsner elektronik KNX RF-MSG-DST, Установка и настройка

Страница: 21 / 26

19 Parameter setting
Radio actuator KNX RF MSG-DST Version: 27.06.2018 • Technical changes and errors excepted.
16 bit input object:
Block – rain blocking
The menu item only appears if a rain blocking was configured for "control". The input
object "rain blocking" is linked with the output object of a rain sensor.
Slat position in % (only if by using a block,
a specific shutter position is achieved)
0...100
Waiting period in secure position in min
after blocking 1...255; 5
Behaviour after waiting period
For manual operation before and after
blocking • no action
• move into last position
For automatic operation after blocking follow automatic
Type of input object 16 bit
As of wind speed in m/s
blocking 2...30; 5
If blocking is active • no action
• stop
• move into position
• up-command • down-command
(shutter/blind)
• retract-command • extend-command
(awning)
• close-command • open-command
(window)
Waiting period in secure position in min
after blocking 1...255; 5
Behavior after waiting period
For manual operation before and after
blocking • no action
• move into last position
For automatic operation after blocking follow automatic
Send current blocking status no • yes
Designation [rain blocking]
Enter a designation here!
If blocking object has value =1 • no action
• stop
• move into position
• up-command • down-command
(shutter/blind)
• retract-command • extend-command
(awning)
• close-command • open-command
(window)