![background image](http://html.mh-extra.com/html/elsner-elektronik/knx-lw-sl-70164/knx-lw-sl-70164_installation-and-adjustment_2396666033.webp)
31
Parameter setting
Brightness and Wind Sensor KNX LW sl
• Status: 19.08.2021 • Errors excepted. Subject to technical changes.
6.8.
Computer
Activate the multi-functional computer, with which the input data can be changed by
calculation, querying a condition or converting the data point type. The menus for the
further setting of the computer are then displayed.
6.8.1. Computers 1-8
Set, in which cases input values received are to be kept per object. Please note that the
setting "After power restoration and programming" should not be used for the initial
start-up, as the factory settings are always used until the first call (setting via objects is
ignored).
Switching output sends on change to 1
do not send message •
If switching output = 1
send 1
Switching output sends on change to 0
do not send message •
If switching output = 0
send 0
Switching output sends on change and
periodically
Send switching output status
Switching output sends on change to 1 and
periodically
If switching output = 1
send 1
Switching output sends on change to 0 and
periodically
If switching output = 0
send 0
Computer 1
No • Yes
Computer...
No • Yes
Computer 8
No • Yes
Maintain the
input values received via communication
objects
• never
• after power supply restoration
• after power supply restoration and
programming
Содержание KNX LW sl 70164
Страница 1: ...Item number 70164 EN KNX LW sl Brightness and Wind Sensor Installation and Adjustment ...
Страница 2: ......