elsner elektronik 70222, Установка и настройка

Страница: 41 / 46

41 Parameter setting
Temperature evaluation unit KNX T6-UN-B4 • Version: 17/12/2019 • Technical changes and errors excepted.
Dead man's switch:
The drive moves as soon as the button is actuated and stops as soon as the button is
released.
5.7. Logic
Activate the logic inputs and assign object values up to 1st communication. Then, ac-
tivate the required logic outputs.
AND logic
OR logic
5.7.1. AND and/or OR logic 1 / 2 / 3 / 4
AND- and OR logic gates provide the same setting options. Assign the inputs to a
switching event and set the send behaviour.
If the logic output sends one 1-bit object:
If the logic output sends two 8-bit objects:
Control mode Dead man's switch
Behavior during button operation:
Push button = Up or Down command
Release button = Stop command
Use logic inputs No • Yes
Object value prior to 1. Communication for:
Logic input 1... 16 0 • 1
Logic 1 / 2 / 3 / 4 not active • active
Logic 1 / 2 / 3 / 4 not active • active
1. / 2. / 3. / 4. Input • do not use
• all switching events which are available
to the sensor (see AND logic connection
inputs , Page 43)“)
Logic output sends • one 1-bit object • two 8-bit objects
Logic output sends one 1 bit object
if logic = 1

object value 1 • 0
if logic = 0

object value 0 • 1