POLARIS 10●15●20●30●40●60●80●100●120●160
TRIPHASE-TRIPHASE
Rev. 04 – 06 December 2016
21
11 - Record- Event Display 12 - Record- Fault Display
(Max 2000 records of alarm can be available)
N.b.: Is possible to reset completely all the records of the events choosing “DELETE”. Only Authorized technicians that have the password
can do this operation.
4.4 Parameters Display & Setting
The following describe the functions of the buttons to perform the display and parameter setting UPS:
BUTTON
FUNCTION
AVAILABLE
SELECT
Short press for selecting
Long press for log out
U
S
E
R
A
U
T
H
O
R
IZ
E
D
T
E
C
H
N
IC
IA
N
S
OFF
Short press to confirmation
Long press to turn OFF the Inverter (on main menu)
ON
Long press to turn ON the Inverter
SELECT + OFF
If you press this key combination in the setting page,you can
enter into the input interface for maintenance password.
(restricted only for authorized technicians)
USERS INTERFACE:
Available views at the user level are those described in section 4.3 (pictures 1 to 12). The enable settings
are those shown in picture 9.
AUTORIZED TECHNICIANS INTERFACE:
Available to technicians and authorized service center, in possession of the password, there is the
possibility to access at the maintenance and advanced settings interface (picture 13) by pressing the key
combination “SELECT + OFF” when you are in the mask shown in picture 9.
Below are described some of the functions available:
•
SYSTEM (Work mode-SINGLE-PARALLEL-ECO, V Output, Frequency, ecc.)
•
BYPASS (Upper/Lower Limit, Range)
•
BATTERY (Number, Capacity, I Max charge ecc.)
•
PARALLEL (ID, Number Unit, Redundance, ecc.)
13 – Maintenance interface
