- 13 -
There are 5 items which can be adjusted, including Resolution (1280x1024, 1024x768, 800x600, 640x480), Brightness, Contrast,
Hue, and Saturation. The operations are as
follows
:
▲▼
Press these buttons to select the items.
+/-
Press these buttons to adjust the selected item.
MODE
Press this button to restore Brightness, Contrast, Hue, and Saturation to factory default values.
ESC
Press this button to escape from this screen, and return to Menu display. If the contents have been modified, a Save dialog will
be shown to ask the user to save the changes, press
ENTER
to exit and save,
ESC
to exit without saving.
5.4 Backup Device
In Menu display, press
▲
▼
to change the highlighted option to Backup Device, and then press
ENTER
to call up Backup Device
display as shown below.
The system does not support
SD card, but supports a variety of USB 2.0 storage devices, including Storage Disk Drives. The
operations are as
follows:
▲▼
◄►
Press these buttons to select the items.
ESC
Press this button to escape from this screen, and return to previous display.
Connect/Disconnect – If the backup device is disconnected (as shown in Current Status), please plug the device in one of the
backup ports (USB) and/or insert a DVD for DVD device, and then press
ENTER
to command the system to connect with it.
If the device is already connected (eg. R/W - Read/write, as shown in Current Status), please press
ENTER
to command the
system software to disconnect with the device, and then unplug the device from the backup port.
Note 1: DO NOT format the DVD disc for better performance and compatibility.
Note 2: Before using USB pen drive, please format it to FAT32 file system by MS-Windows;
Note 3: The backup device has to be connected by the system software before it can be used to read/write.
Note 4: Some backup devices may have compatibility problems. Please contact your local dealer or installer for the
supported devices.
Note 5: Please DO NOT unplug the backup device when it’s connected, or the system may become abnormal or even hang
up.
Backup
Press
ENTER
when this item is selected to backup the configurations of this unit to the corresponding device.
Restore
Press
ENTER
when this item is selected to restore the configuration files in the corresponding backup device to this unit.=
Some USB 2.0 Devices Tested
USB-Storage Enclosures 5.25” –
Macpower’s Alumni Prefect USB 2.0 - PF-U2MS
USB-Disk Storage –
- 14 -
Transcend’s JetFlash 150/V60 Series
Apacer’s Handy Steno AH220
Pretec’s i-Disk Wave 512M-Black
Kingston’s DataTraveler USB Flash Driver(DTI/512FE)
SanDisk’s Cruzer micro USB Flash Driver
Sony’s MICRO VAULT Classic Series
