Mitterweg 25 – Via di Mezzo ai Piani 25
I
-39100 Bozen
-
Bolzano
Tel.:0471 977236
-
Fax:976525
e-mail:
http://www.elmed.it
22
4
System Setup
Various settings can be adjusted in System setup:
•
Language (→ chapter 4.1)
•
Alarms (→ chapter 4.2)
•
Content display (→ chapter 4.3)
•
Date & time (→ chapter 4.4)
•
Operating hours (→ chapter 4.5)
•
Display settings (→ chapter 5)
•
Setup (→ chapter 6)
•
Service (→ chapter 7)
4.1
Language
Select your chosen language in the language selection list.
The language will change as soon as the OK button is
pressed.
4.2
Alarm
Alarm when the speed exceeds or falls below the limit
If the speed of travel exceeds or falls below the value set
here, the alarm is triggered. The alarm is a repetitive beep, and
a “ringing” bell appears on the screen.
Important: This speed monitoring only functions in the main
screen, if automatic mode is active and when a spray
programme is operating.
4.3
Content display (fast / slow)
The button for setting the volume display can be found in the "Settings" menu. It changes
function with each push of the button:
Volume fast
Volume slow
If level changes need to be displayed quickly, then press on the symbol with the "Volume
fast" label. Every change in level will now be displayed immediately. This setting is
especially beneficial when dosing chemicals.
If, on the other hand, you wish to have the volume displayed more slowly, then press
"Volume slow". This setting is especially recommended during travel, where otherwise
small jolts can sometimes cause big fluctuations in the display, which make it unnecessarily
difficult to use.
Fig. 25: System setup
Fig. 26: Language selection
Fig. 27: Speed alarm