Mitterweg 25 – Via di Mezzo ai Piani 25
I
-39100 Bozen
-
Bolzano
Tel.:0471 977236
-
Fax:976525
e-mail:
http://www.elmed.it
13
The distance, content and area buttons
The three buttons for “Dist. = 0”, “Liter = 0” and “Area = 0”, can be used to reset the
counters for the display in the main window for distance, amount (litres) and area to 0
(see also chapter 1.1 → distance [m]/kmh], content [l] and area [ha]). Useful before
starting a new spraying operation without a spray programme.
Notes: Spraying operations are not recorded in semi-automatic mode and are therefore also
not available for statistical purposes or for evaluation on the PC.
3
Spray Management
Spray programmes can be created and edited in
Spray Management. These are required for starting
a spraying operation in automatic mode. A spray
programme is started using the Start button in the
"Setup"
menu
(see
also
chapter
“3.5
spraying”).
The
fields
and
chemicals/products involved can be managed here
too. Moreover, the spraying operations recorded to
date can be viewed in the statistics.
Creating a spray programme
1. Set up a field (→ chapter 3.1) in the Field Management menu.
2. In the Spray programme menu (→ chapter 3.2) press on the pencil button. This will
enable you to access the “Spray programme management” menu (→ chapter 3.1.4) where
you can create a new spray programme.
3. Once you have returned to the Spray programme menu, you will be able to select the
desired programme and allocate it to a field (see → chapter 3.1.1)
4. As soon as the desired programme has been allocated to a field, you can proceed with
programming the spray programme. ( → chapter 3.1.2).
5. Save the programme with the “save” button.
Summary:
- Field (→ chapter 3.1)
- Spray programmes (→ chapter 3.2)
- Page 1: (Programme and field selection) (→ chapter 3.2.1)
- Page 2: (Programme settings) (→ chapter 3.2.2)
- Page 3: (Selecting the chemical/product) (→ chapter 3.2.3)
- Chemicals/Products (→ chapter 3.3)
- Statistics (→ chapter 3.4)
Fig. 11: Spray management