Appendix 4: Expert Mode
© Elma Schmidbauer GmbH
BA_Elmasolvex_VA_EN_Vers.05.2018
131
Fig. 7.2.1.4 Display screen – process step
Cleaning
Press on the
Cleaning1
tab to be able to modify the process
parameters for this process step. Use
/
to navigate
between the parameters. Press / to change the preset
values. Use to save changes at any time. When you have
made the desired changes, press to return to the display
screen with the process step tabs (Fig. 7.2.1.3). You can also
press to return to the
Program Selection
display.
If you did not save your changes by pressing , you will be
prompted to save any changes when you press /
(
Fig. 7.2.1.5
).
Fig. 7.2.1.5
Save Settings
display
Use / in the selection list to select the required action, and
confirm with .
Use
Save Changes
to save any amended settings and return to
the
Program Selection
display
.
Use
Discard Changes
to return to the
Program Selection
display without saving your changes
.
Use
Cancel
to return to the previous display screen.
