27
RFSOU-1
RFSOU-1
3
2
1
4
7
6
5
8
A
0
9
B
E
D
C
F
C
OK
EN
It serves to control or remove the detector from the name of the
menu you created.
In the selected section (Detectors) select
Assigned detectors
(fig.
69)
a list of names specifi ed in this section will be shown
(fig. 65)
.
Touching on the name you will assign it to the detector
(fig. 66)
. By
pressing arrows you can check the name and address assigned to
the detector
(fig. 66—67)
.
By touching the name or address of the detectors the menu is
displayed
(fig. 68)
:
Remove
(fig. 70)
,
Change of Address
(fig. 71)
,
Pair with...
(fig. 72—73)
and
Paired with...
(fig. 74—75).
•
Paired with...
(fig. 74—75)
− This menu will lists switching actuators, which are paired with the
detectors. By touching the name you can remove paired actuator.
Note:
•
Detectors RF
and
two state detectors OASIS
(JA-81M, JA-82M) can be used
in two ways:
− information about the status (open / close) − eg window is open(without
pairing with a switching actuator)
− pairing with the multifunction switching actuator, which responds to the
detector status (open / close) − eg light is switched on when you open
the door.
•
Single state detectors OASIS
(JA-80P) must always be paired with multi-
function actuator.
Setting / Programming / Detectors / Assigned detectors
fig. 69
fig. 70
fig. 71
fig. 74
fig. 75
fig. 72
fig. 73
Detectors
Assigned
detectors
Assing
detector
Remove
Do you really
want to remove?
Insert address
Paired with ...
terrace
front doors
room 1 window
bedroom window
kitchen window
rear doors
Pair with ...
terrace
front doors
room 1 window
bedroom window
kitchen window
rear doors
Pair with ...
terrace
front doors
room 1 window
bedroom window
kitchen window
rear doors
front doors
Remove
Do you really
want to remove?
YES
NO
YES
NO
Pair with ...
terrace
front doors
room 1 window
bedroom window
kitchen window
rear doors