26
RFSTI-11/G IN
12345A
RFSOU-1
JA-81M/82M
RFSOU-1
RFSF-1 (B)
JA-80P
RFSF-1
JA-81M / 82M
• Detectors OASIS
(fig. 62)
:
RF Touch will enable search
(fig. 63)
− searching icon
is shown.
RF Touch will recognize new detector when batteries are inserted
into the detector. Confi rm the assignment by pressing
(fig. 64)
.
Choose a name to which the detector will be assigned
(fig. 65)
.
Pressing arrows
can display the name or address associated with
the detector
(fig. 66
—
67)
. When you touch on the name or address
of the detector following options appear
(fig. 68)
:
•
Remove
(fig. 70)
− used for deleting link between the detector and the name given
in the Detector menu.
•
Change of Address
(fig. 71)
(Only RF detectors)
− edit to change addresses of assigned detector.
•
Pair with...
(fig. 72
—
73)
− paired detector can be paired with the multifunction switching
actuator from switching menu, (eg, motion detector with entrance
light).
One detector can be paired with up to 30 multifunction switching
actuators.
If the detector is paired with a switching actuator function of
delayed off feature is automatically activated. When detector
switch on, actuator switches connected device for preset time
(2s−60min). Time delay can be set in the main Menu / Control of
the paired actuators (see page 36).
The above method can be used to assign additional detectors.
The RF Touch can be programmed with up to 30 detectors.
Note: the shortest distance to assign a detector is 1.5m).
fig. 65
fig. 66
fig. 67
fig. 63
fig. 64
fig. 68
fig. 62
Searching ...
Founded detector
Searching
Assign new
Pair with ...
Remove
Paired with ...
Change of Address
terrace
Location
front doors
room 1 window
bedroom window
kitchen window
rear doors
Assigned
Assigned