Elkay Manufacturing Company
14
Installation & Maintenance Manual (1000005506 Rev D)
e. Slowly open the CO
2
tank regulator valve on top of
the CO
2
tank counterclockwise (left) until it is fully
opened.
OPEN
463b
f. Turn adjusting knob on the regulator until the
pressure reaches 55 to 60 psi.
NOTICE
Do not exceed the
maximum 60 PSI pressure.
Exceeding the maximum pressure will cause
internal damage and void the warranty.
OPEN
463d
6. Set Up Instructions
6.1 Initial Settings
1.
Make sure the water fi lter has been installed and
if Sparkling water is desired, that the CO
2
tank has
been installed and connected. Refer to section "5.
Installation" on page 9 for complete details.
2. Make sure the Ethernet cable is connected to a local
Internet router or to the Wi-Fi Extender.
3. Turn the main power switch ON.
399
4. A loading screen followed by the welcome screen will
appear.
