Elite iGATE G500 Series, Руководство оператора

Страница: 90 / 157

90
PLACING AIRCRAFT ABEAM THE RUNWAYTHRESHOLD
ON PARALLEL TAXIWAY
Click-and-hold on aircraft symbol / press ALT and “drop” aircraft on
runway threshold.
Placing aircraft perpendicular to runway threshold in a “hold short”
position on taxiway:
Click-and-hold on aircraft symbol / press SHIFT and “drop” aircraft
on run way threshold.
MANUAL SELECTION OF “ACTIVE” RUNWAY TOGGLE
An active runway is normally selected automatically by the soft-
ware based on aircraft orientation and distance from a given run-
way. Once the active runway has been determined, runway lights are
turned ON for that runway. You can however override this automat-
ic selection by manually selecting the active runway following the
procedure below.
Press ALT-A to engage or disengage mode. Once engaged, enables
you to manually select ELITE’s “active” runway by clicking on the
threshold of desired runway (runway color changes to green to iden-
tify that it is active). You can change your selection as many times as
you like while the manual selection mode is engaged. Manual selec-
tion mode will stay engaged until ALT-A is pressed again. Only one
runway at a time can be “active.” To deselect a manually selected ac-
tive runway press ALT-A (if not already in manual selection mode)
and click anywhere on the MAP page NOT occupied by a runway.
SUMMARY
1. ALT-A to engage manual selection mode
2. Click on runway threshold as desired to make “active”