Elite iGATE G500 Series Скачать руководство пользователя страница 100

Страница: 100 / 157

100

VISIBILITY

Above Cloud Layer 1:

Select visibility using UP/DOWN arrows as desired.

NOTE: Visibility can only be adjusted if cloud layer 1 coverage is

set to OVERCAST.

With an OVERCAST layer programmed, selected visibility will be-

come the controlling visibility above the TOP of the OVERCAST

up to FL400 (40,000ft). If no layer 1 OVERCAST is programmed,

visibility adjustment is disabled and the visibility setting associated

with next lowest OVERCAST layer will control visibility. If no low-

er OVERCAST layer is programmed, then “surface” visibility will

be the controlling visibility for all altitudes from the surface up to

FL400 (40,000ft).

Cloud Layers 2 and 3:

Select visibility using UP/DOWN arrows as desired.

NOTE: Visibility can only be adjusted if cloud coverage is set to

OVERCAST.

With an OVERCAST layer programmed, selected visibility will be-

come the controlling visibility above the TOP of the OVERCAST

up to the next highest OVERCAST layer programmed. This then

becomes the visibility between the OVERCAST layers. If no higher

OVERCAST layer is programmed, then the selected visibility will

become the controlling visibility for all altitudes from the TOP of the

OVERCAST up to FL400 (40,000ft).

If no OVERCAST is programmed at the current layer, visibility ad-

justment is disabled and the visibility setting associated with the next

lowest OVERCAST layer will control visibility. sired. Preset buttons

have the following corresponding visibility values:

Содержание iGATE G500 Series





























































































































































Результаты поиска

Содержание iGATE G500 Series

Отзывы:

Бренды по названию

Популярные бренды

Elite iGATE G500 Series, Руководство оператора

Результаты поиска

Содержание iGATE G500 Series

Отзывы:

Бренды по названию

Популярные бренды