Elite iGATE G500 Series Скачать руководство пользователя страница 10

Страница: 10 / 157

Term and Termination

7. This license terminates if you fail to comply with any

provision of this Agreement. You agree upon termination to

destroy all copies of the program, modifications and merged

portions in any form. The original software must remain with

the iGATE training device.

Limited Warranty

8. Licensor warrants that the Software will perform substan

tially in accordance with the accompanying written materials

for a period of 90 days from the date of your receipt of the

Software. Any implied warranties on the Software are limited

to 90 days. Some states do not allow limitations on duration

of an implied warranty, so the above limitation may not apply

to You.

9. LICENSOR DISCLAIMS ALL OTHER WARRANTIES, EI

THER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIM

ITED TO IMPLIED WARRANTIES OF MERCHANTA BILITY,

FITNESS FOR A PARTICULAR PURPOSE, AND NON-IN

FRINGEMENT, WITH RESPECT TO THE SOFTWARE AND

THE ACCOMPANYING MATERIALS. This limited warranty

gives You specific legal rights. You may have others, which

vary from state to state.

10. LICENSOR’S ENTIRE LIABILITY AND YOUR EXCLU

SIVE REMEDY SHALL BE REPLACEMENT OF THE SOFT

WARE. Any replacement Software will be warranted for the

remainder of the original warranty period or 30 days, which

ever is longer. These remedies are not available outside the

United States of America.

11. This Limited Warranty is void if failure of the Software

has resulted from modification, accident, abuse, or misappli

cation.

Содержание iGATE G500 Series





























































































































































Результаты поиска

Содержание iGATE G500 Series

Отзывы:

Бренды по названию

Популярные бренды

Elite iGATE G500 Series, Руководство оператора

Результаты поиска

Содержание iGATE G500 Series

Отзывы:

Бренды по названию

Популярные бренды