Elite Greenhouses 8'5" Wide Thyme, Инструкции и иллюстрации

Страница: 6 / 40

HELPFUL HINTS
·
Please do take your time and be sure to read all instructions carefully before assembling.
· HELPFUL VIDEOS ARE AVAILABLE ON OUR WEBSITE
www.elite-greenhouses.co.uk
·
Do not assemble frame in high winds.
·
The greenhouse frame should be anchored to a permanent foundation. This will not only help
secure it against powerful wind but will help prevent breakage of the glass caused by the
freezing and thawing process of the earth.
·
When building your own brick/concrete foundations ensure that they are level and square
otherwise your frame will not be correct and the glass will not fit.
·
Be sure all four corners of the constructed greenhouse are square before installing glass, and
do not install the glass till the greenhouse is on a permanent foundation.
·
Do not place your greenhouse in vulnerable locations such as under trees, playing areas, etc.
·
Children should not play near glass greenhouses.
·
REMEMBER: glass is fragile, handle with care!
·
Protective eye glasses should be worn.
·
Gloves should be worn.
·
If your greenhouse is a painted one there are a few 1/8” (3mm) holes in the end of the bars.
These are jig holes for painting and have no bearing on construction.
(Key point).
·
When Powder Coated, the sub-frame assembly packages may slightly differ from the standard
alloy finish.
·
Powder coated packages are wrapped in polythene tubing – please be careful when opening
e.g. Do not run a knife down the sides as you can scratch the paintwork.
·
WHEN CONSTRUCTING A PAINTED MODEL PLEASE TAKE CARE NOT TO
DAMAGE THE FINISH BY WORKING ON CONCRETE OR PATIOS.
·
N.B. This plan covers the entire 8’wide thyme range. The only difference between a 6ft
long and an 8ft long for example are a few extra pieces of alloy, glass, nuts and bolts etc.
The construction of the sub-frame assemblies is the same but for the purposes of this
booklet we have used the 12x8 model as the benchmark. Therefore only one plan is
needed.
·
We reserve the right to alter and improve our products.