Elite Greenhouses 8'5" Wide Thyme, Инструкции и иллюстрации

Страница: 17 / 40

Now you can attach the smaller middle (3
rd
) glazing bar to the ridge gusset plate and the unoccupied
hole in the centre of the main door track support. You may need to adjust the position on the door
track support to fit to the glazing bar.
Attach the small horizontal brace to the 2nd bolt inserted in all vertical glazing bars.
The two long horizontal braces can now be attached to the
top bolt
in the gusset plate and the re-
maining unoccupied bolts in the vertical glazing bars. Shown below in the door end exploded view.
Bolt the main door track to the main door track support by inserting 3 bolts into the bolt channel at
the back of the door track. Position these through the 3 holes in the door track support above the
door opening. The door track should be positioned centrally. When this has been achieved tighten
all nuts.
Please note, you only require approx. 200mm of beading in the inside ‘v’ groove of the two end
glazing bars. This is to allow successful glass fitting above the door.
N.B. Please note carefully the correct position of the main door track support. The slotted holes at
either end are facing skywards
not
downwards.