Elite Greenhouses 7'5'' VANTAGE, Инструкция по эксплуатации

Страница: 6 / 36

6
DETAILED ASSEMBLY INSTRUCTIONS
The contents of this carton are divided into the different frame assemblies that collectively
make up the completed unit.
It is recommended that each frame assembly is fully completed before moving on to the next.
The frames to be constructed are as follows:
SIDE FRAME – Two off.
REAR GABLE – One off.
DOOR GABLE)– One off.
ROOF VENT – One for 4 x 7, 6 x 7, two for 8 x 7, 10 x 7 and 12x7, three for 14 x 7, four for 16 x
7, five for 18 x 7, six for 20 x 7.
DOORS – 2 x 18” doors.
Additional parts such as the ridge, roof bars, eaves ties etc. are put on “loose” and are not pre-
constructed into an independent frame. The partition, if appropriate is constructed in situ and not as
an independent frame.
WE CAN NOW COMMENCE WITH THE ASSEMBLY