6 | EN
Ⓒ
elero GmbH
Ⓒ
elero GmbH
EN | 7
the operating site, must be observed. Provisions and Stand-
ards for the safety rating can be found in the EC Declaration
of Conformity
1.3 Intended use
The device is intended to be used in a domestic distribu-
tion environment (to control electrically driven shutters,
sunblinds, sunshades, roller blinds, electrical lighting and
heating equipment). It is a multi-channel radio wall transmit-
ter. Further fields of application have to be arranged with
the manufacturer,
elero
GmbH Antriebstechnik (see Chap-
ter 10, Manufacturer's Address).
The operator will be solely responsible for damages result-
ing from improper use of the device. The manufacturer can-
not be held liable for personal or material damages caused
by misuse or procedural errors, and by improper operation
and commissioning.
Only if used according to the specifications of these operat-
ing instructions the safe and proper use and safe operation
of the device are guaranteed.
1.4 Foreseeable misuse
A use which deviates from the intended use stated by the
manufacturer,
elero
GmbH Antriebstechnik (for address,
see Chapter 10, Manufacturer's Address), is deemed fore-
seeable misuse.
1.5 Warranty and liability
Principally, the General Terms and Conditions of the manu-
facturer,
elero
GmbH Antriebstechnik (see Chapter 10,
Manufacturer's Address for address), apply. The terms and
conditions are part of the sales documents and handed over
to the operator upon delivery. Liability claims for personal or
material damages are excluded when they can be attributed
to one or more of the following causes:
Customer has opened the device (seal is broken)
Unintended use of the device
Improper installation, commissioning, or operation of the
device
Structural modifications to the device without the written
consent of the manufacturer
Operation of the device with improperly installed con-
nections, defective safety devices or improperly installed
safeguards
Non-observance of the safety provisions and instructions
of these Operating Instructions
Exceeding of the technical data indicated
1.6 Customer service of the manufacturer
The device should only be repaired by the manufacturer
in case of a failure. The address for sending to customer
service, see chapter 10, Manufacturer's Address.
Содержание MultiTec Touch-868
Страница 27: ...52 EN Ⓒ elero GmbH ...