elero MultiTec Touch-868, Руководство по эксплуатации

Страница: 18 / 27

34 | EN Ⓒ elero GmbH
Ⓒ
elero GmbH EN | 35
3.12.3 Settings → Central channel →
Visibility (not) active
Active visibility permits selection of the central channel in
the channel overview of the home screen. Activated visibility
is displayed brightly backlit.
3.12.4 Settings → Central channel → Configuration
Program position Down:
Valid for time-controlled travel commands: Select a target
run to the lower end position or the intermediate position or
ventilation position (differently sensible depending on appli-
cation roller shutter, Venetian blind or awning).
Program position Up
Valid for time-controlled travel commands: Select a target
run to the upper end position or the intermediate position or
ventilation position (differently sensible depending on appli-
cation roller shutter, Venetian blind or awning).
Priority clock:
Priority automatic commands On or Off
When the priority is activated, it can be specified in the
central channel that automatic time switching commands
from the wall transmitter channel are given priority in all
receivers and accepted by the receivers even in manual
operating mode.
Shading Clock
With the function Shading Clock activated: A time-controlled
down command switches off the automatic shading sys-
tem (privacy protection). A time-controlled open command
switches on the automatic shading system again.
3.12.5 Settings → Central channel → Delete channel
Status line: Deletion of transmitter
Central channel All channels in the transmitter are deleted.
Terminate with safety prompt.
3.13 Settings → Product info
Status line: Display product info
Display of version information
3.13.1 Settings → Groups → Group
Status line: Channel/Group settings - group number
A group is understood to mean the control of several receiv-
ers (channels) at the same time. The selected group is con-
trolled together by a single travel command. All 20 channels
(transmitter) can be used for the group control.
Any number of receivers can be programmed and con-
trolled in each channel.
The further submenus are accordingly structured in the
same manner as for a single channel.
3.13.2 Settings → Groups → Group → Administration
Status line: Change administration data - group number