elero MultiTec Touch-868, Руководство по эксплуатации

Страница: 21 / 27

40 | EN Ⓒ elero GmbH
Ⓒ
elero GmbH EN | 41
3. Press the
UP
button as soon as the curtain starts moving
in the upwards direction (within 1 second at the most).
The status indicator is lit briefly. The curtain stops briefly,
starts moving again and then moves downwards.
4. Press the DOWN button as soon as the curtain starts
moving in the downwards direction (within 1 second at
the most). The status indicator is lit briefly. The curtain
stops. The transmitter channel has been programmed.
If more than 10 bidirectional receivers are being pro-
grammed in one channel at the same time, the transmitter
channel in programming mode switches to group mode.
The group mode is visualised by the display "10+" to the
right of the green transmission signal.
Programming in group mode is competed after a pause of
2 minutes. Programming in the wall transmitter (signalled
by orange background) can be terminated by pushing the
touch field Cancel or by pushing the STOP button for 6 sec-
onds (square symbol).
Note
A jogging mode for Venetian blinds for quickly reaching
receivers which are further away is not possible in a bidirec-
tional transmitter channel with more than 10 programmed
receivers.
4.2 Stopping programming mode (bidirectional)
in the transmitter
Press the STOP button and hold for at least 6 seconds until
the status display lights up orange.
4.3 Approaching limit positions of roller
shutter / awning / Venetian blind
Requirement
The transmitter/transmitter channel has been programmed.
The end positions of the drive are set.
Approaching the lower end position (roller shutter/awn-
ing)
Push the DOWN button. The curtain descends to the lower
end position/the awning extends fully.
Approaching the lower end position (blind)
Push the DOWN button. The curtain approaches the lower
end position.
Push the DOWN button only briefly (jog mode at YES,
impulse mode at Combio Pulse). The curtain starts and
stops again.
Approaching the upper end position (roller shutter /
awning)
Push the UP button. The curtain approaches the upper end
position/the awning retracts.
Approaching the upper end position (blind)
Push the UP button. The curtain approaches the upper end
position.
Push the UP button only briefly (jog mode at YES, impulse
mode at Combio Pulse). The curtain starts and stops again.