elero MultiTec Touch-868, Руководство по эксплуатации

Страница: 23 / 27

44 | EN Ⓒ elero GmbH
Ⓒ
elero GmbH EN | 45
Deleting individual transmitter channel in the receiver
1. Push touch field configuration.
2. Push touch field channels.
3. Select touch field of the desired channel.
4. Push touch field delete channel.
The channel in the transmitter is now deleted.
4.5 Moving to intermediate position / ventilation
position / turning position
Requirements:
The intermediate position and ventilation position for the
application roller shutter or the turning position for the ap-
plication Venetian blind must have been set up with another
transmitter than the MultiTech Touch-868 /-915.
The transmitter has been programmed and the intermediate
position (roller shutter) or turning position (Venetian blind) of
the driver is set. The curtain is in the upper end position.
‰
Push the DOWN button in the upper end position twice
briefly.
The curtain will move to the registered intermediate posi-
tion. In the case of Venetian blinds, the slats turn automati-
cally after reaching the intermediate position if a turning
position has been programmed. If no intermediate position
is programmed, the curtain travels to the lower end position
(not if elero Combio Pulse is in use).
‰
Push the UP button in the lower end position twice briefly.
The curtain will move to the registered ventilation / turning
position. If no ventilation/turning position is programmed,
the curtain travels to the upper end position (not if elero
Combio Pulse is in use).
4.6 Delete transmitter channel in the receiver or
Delete all transmitters in the receiver
‰
In the menu Channel/group settings , select the function
Delete channel
.
‰
Select the function button to delete the selected chan-
nel Delete (only the selected channel is deleted in the
receiver) or function button to delete all transmitters in
the receiver Delete channel and confirm the respective
deletion process.
5 Specifications
All information in this chapter refers to an ambient tempera-
ture of 20 °C (± 5 °C).
Specifications MultiTec Touch-868 /-915
Mains connection 230 V AC
Power supply via
Mini-USB (socket)
5 V DC,
max. 0.5 A
Power supply / standby 0.5 W (typical)
Battery type CR 2032
Protection type IP20
Permitted
ambient temperature [°C]
0 to 45
Radio frequency [MHz] 868 | 915