Elektro-Automatik 33200246, Инструкция по эксплуатации

Страница: 25 / 46

25
EN
Instruction Manual
EL 9000 HP Series
Date: 05-31-2011
General
Safety instructions
•
Only operate the device at a mains voltage as stipulated
on the type plate
•
Never insert mechanical parts, especially from metal,
through the air ventilation slots
•
Avoid any use of liquids of any kind in the proximity of
the device, they might get into it
•
Do not connect voltage sources to the device which
are able to generate voltages higher than 100V
DC
(80V
model) or 180V
DC
(160V model) or 460V
DC
(400V model)
•
In order to equip interface cards into the slot at the
rear, the common ESD provisions have to be followed
•
The interface card may only be plugged and unplugged
while the unit is completely switched off (mains switch
OFF)
•
Always observe limit and nominal values of the device
when connecting a voltage source or battery, as well
as when using the analogue interface
•
The DC input is not fused!
© Elektro-Automatik
Reprint, duplication or partly, wrong use of this instruction
manual are prohibited and might be followed by legal
consequences.